1. 8 – 12 years of experience

2. At least 3-6 years of experience with RNP&RNO experience

3. Network planning

1. Strong knowledge of GSM/GPRS/EDGE, CDMA, UMTS

2. Radio network planning according to project requirement

3. Skillful in operating U-NET, Asset, Planet EV, Network Planning tools.

4. Do the network detail planning such as homing planning, LAC planning, frequency planning, neighbor planning and so on

4. Network optimization

1. Skillful in operating RNO analysis software, such as Probe & Assistant, Nastar, Scanner (for UMTS), TEMS, ACTIX, Nemo, Swissqual etc.

2. Skillful in operating RANOP, SCHEMA, OPTIMA etc.

3. Strong knowledge of GSM/GPRS/EDGE,CDMA, UMTS radio network optimization

4. Study on existing network configurations and Improve the network Performance, KPI Enhancement plan

5. Involve in drive test analysis and drive test, Assist drive test analysis engineer by providing technical solution

6. Do the network optimization based on traffic analysis

7. Monitor the KPI on daily wise, Maintain and improve the KPI Performance

8. Assist troubleshooting team on KPIs analysis by providing technical solution

9. Generate network evaluation report for Swap scenario

10. Evaluate Pre-swap DT result and Post swap DT results ensure the KPI’s .

11. Evaluate the impact of New Roll out to the network performance in the aspect of coverage and quality

12. Responsible for meeting all target KPIs Including Voice and Data services.

5. Preference to the candidate who worked on Ericson, NOKIA, Huawei Network systems

• Monitor the technical quality of reports and presentations for the project

• Generate and provide technical presentations to the customer

• Initiate discussion and presentation with Implementation team and customer to define the parameter baseline

• Responsible for Baseline update from customer requirement and technical upgrade

• Assist the sales responsible in pre-sale activities.

• Ensure that delivery requirements are adequately reflected in the Contract and pricing

• Define project organization and resource requirements

• Prepare resource and time plans for delivery

• Define the role and responsibilities of each engineer in the project

• Assist in setting-up a contract with sub-contractors with Procurement Team

• Adapt service delivery processes and methods to meet specific customer and project requirements defined in the Contract

• Set-up delivery processes

• Be responsible for project progress and cost control

• Report to customer and TechM Management Team of project

• Organizing the coordination among the project team, with the subcontractor and the customer

• Ensure adequate people and tools resources are in place

• Ensure the circle Final RNP&RNO delivery

• Ensure the customer signs Final Acceptance.

• Be present at all the RNP and RNO related meetings; decide on the proposals and changes in the network.

• Responsible for the overall and technical quality of reports and presentations for the project

• Involve detail discussion with technical support and customer for Route definition, Cluster planning, KPIs acceptance criteria, Drive Test methodology and Initial tuning acceptance procedure

• Facilitate agreement with the customer of KPI Items, Test methodology, parameters mapping, KPI formulas mapping, report formats and contents, etc

• Set up the Methods, Planning Tools and Data Processing functions in the project.

• Adapt the Methods, Planning Tools and Data Processing to meet the Contract and customer requirements

• Facilitate agreement with the customer of Scenario Define, Site Selection, methods, test route planning, parameter tuning, report formats and contents, etc

• Facilitate agreement with the customer of Naming rule for BSS, methods, Frequency re-use pattern, system parameter baseline, LAC/RA Planning, report formats and contents, etc

• Review and approve the RNP Reports and Change Proposals that the TechM Engineer have produced

• Access the model parameter tuning, verification and analyze the key point.

• Be present at all the RNP related meetings, present results to the customer, take minutes in the meetings of agreed proposals and changes in the network

• Model tuning parameter obtain from propagation model tuning module or select a familiar model agreed with customer

• Ensure evaluate the impact of Frequency Plan provided by customer where Swap and New Roll out implement simultaneously in a cluster is in acceptable level

• Responsible for negotiation with customer if Frequency Plan is not within an acceptable level in the scenario where Swap+New Roll out implement simultaneously

• Comprehensive analysis with RNP engineer on final frequency planning and neighbor planning

• Responsible for Nominal planning discussion with customer

• Ensure the final RF configuration

• Site list changed evaluation and discussion with customer

• Comprehensive analysis with RNP engineer on simulation result for the poor coverage and interference

• Define the channel configuration rule

• Monitor the technical quality of reports and presentations for the project

• Review and approve the RNP reports and change proposals that the RNP Engineer have produced

• Provide technical support on site simulations, analyze the key point.

• Monitor the technical quality of reports and presentations for the project

• Train Engineer and Sub-Contractors in the use of methods, processes and tools

• Train Engineer in system parameter, especially optimization parameter

• Coordinate with customers to get parameters setting and KPI formulas of existing network

• Analysis parameters settings of existing network

• Analysis KPI settings of existing network

• Responsible on mapping the existing parameters definition and values , discuss with customers